Shenzhen Dapeng Laser Equipment Co., Ltd.
One-stop Solutions for Laser Equipment
Add to Cart
100W 200W Raycus Laser Source Trolley Case Portable Fiber Laser Cleaning Machine
Basic introduction
Laser cleaning has the characteristics of no grinding, non-contact, no thermal effect and suitable for objects of various materials, and is considered to be the most reliable and effective solution. At the same time, laser cleaning can solve problems that cannot be solved by traditional cleaning methods.
Features
1. No consumables, no chemical pollution, no noise, energy saving and electricity saving.
2. No contact, no grinding, no stress, little damage to the substrate.
3. It can eliminate the pollution particles below the nanometer level, and the cleanliness is high.
4. Optical fiber transmission, movable operation, can clean up dead spots.
5. Simultaneous cleaning and synchronous processing to achieve zero discharge during the cleaning process.
6. It can realize fast cleaning of heavy pollutants and high-speed cleaning of light pollutants.
Application industry
Laser cleaning can be used not only to clean organic pollutants, but also to clean inorganic substances, including metal rust, metal particles, dust, etc. It is mainly used in the cleaning of molds, weapons and equipment, old aircraft paint, exterior walls of buildings, electronics industry, precision de-esterification in precision machinery industry, and pipelines in nuclear power plant reactors.
| Cleaning Performance Parameters | |||||
| Based material | Surface | Effective focal length | Standard cleaning efficiency | High cleaning efficiency | Result |
| Cast iron | Heavy rust 0.08mm | >35mm | 2000mm/m | 3000mm/m | Clean, no harm for base material |
| Mild steel | Middle rust 0.5mm | >45mm | 1800mm/m | 2400mm/m | Clean, no harm for base material |
| Stainless steel | Oil, light rust | >50mm | 2000mm/m | 3000mm/m | Clean, no harm for base material |
| Mould gear | Middle oil with scrap iron | >45mm | 2000mm/m | 2300mm/m | Clean, no harm for base material |
| Aluminum | oxide | >35mm | 2000mm/m | 2300mm/m | Clean, no harm for base material |
| Laser Power | 100W | 200W |
| Laser Source | Raycus | Raycus |
| Fiber Length | 3m | 3/5m |
| Cooling Type | Air Cooling | Air Cooling |
| Input Power | 220V | 220V |
| Power | <500W | <1300W |
| Dimensions | 575*408*270mm | 685*538*411mm |
| Total Weight | 30KG | 65KG |
| Scan Head Weight | 2KG | 2KG |
DP Laser cleaning machine has advanced technology, with humanized design, small size, flexible operation, low energy consumption, environmental protection and other characteristics, with certain practicability and operability. Customers can preset the cleaning mode through the software, and can directly switch the mode to operate without adjusting the parameters, and start cleaning without chemical reagents, media, dust and water. Through automatic focusing, cleaning the surface of the object, and removing resin, stains, corrosion, coatings, paints, etc. on the surface of the object, the cleanliness is high.